Love Between Storeys

This marks the end of our Elevator Set series. Hope you had an enjoyable read!

Here’s a handy index page for every update: Making Love Between Storeys Index.
Continue reading »

The emergency light mode kicks in when the elevator goes from complete darkness into a power saver mode. The top light and ceiling spots are off and the only available light comes through the doors and the floor at this time. This was the most interesting sequence lightingwise for me (Nils-Erik) as I love dark and moody stuff.

Continue reading »

A very common question for beginners on the film-making scene is, how do you light darkness? The answer is, you can’t. You need a light source somewhere for the audience to realistically be able to see anything. There’s a scene in the script when the elevator goes dark, and we used the gaps in the elevator doors to get some light into that darkness.

When the elevator goes dark, we switch the lights off mid-shot. First, the lights are on...

... then they're out. See the boxes of light left to give some light to the actors.

Continue reading »

Normal light mode is the general light set up for when the characters hang out in the elevator. All our light sources (ceiling, wall spots, doors and floor) are in use during this mode. There’s slight variation in how much power is channelled into the ceiling lights depending on which stage of the elevator sequence we’re in.

The light is a bit more harsh (harder and less soft) at the beginning and the end of the elevator sequence. This was achieved by removing some of the garden plant cover from the sides of our soft and powerful top light, and also by channeling more power into the bulbs through our dimmer. This subtle variation was done to get a softer mood in the elevator while the characters get to know each other.

I’d imagine that without access to a dimmer pack, we would’ve simply switched a bunch of the 150 watt bulbs to 100 watt (or less) bulbs.

Here’s a couple of framegrabs where we break down what exactly is happening lightingwise to give you a practical idea of how we worked on our shots.

;

Jenny and Adam standing in the lift (before blackout). All our lights are in use

Continue reading »

In this section we cover the different light modes in the elevator and what different moods they give to the elevator sequence.

We had three different light modes in the elevator:

1) Normal – When the characters hang out in the elevator

2) Darkness – During the power outage

3) Emergency light mode – When the elevator is in power saver mode

Continue reading »

We decided the emergency console and floor labels needed a light of their own so that the audience could see them. This was done by rigging a lamp behind the console.

We also slapped on a blue filter to get a mechanical sheen to the labels. This would also make them stand out a bit more.

Testing how blue the buttons should be

Continue reading »